Category: Machining Material

  • Monel400 Performance

    Monel400 Performance

    Corrosion resistance and main use environment: The corrosion resistance of Monel400 is generally superior to nickel and copper. It is more resistant to corrosion by reducing media than pure nickel, and is more resistant to corrosion by oxidizing media than pure copper. The corrosion resistance is very good. In particular, it is resistant to corrosion by hydrochloric acid and has excellent corrosion resistance to hot concentrated alkali. Machining Monel 400 alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in

  • what is inconel?

    what is inconel?

    Inconel is a nickel-chromium-iron-based solid solution strengthening alloy, which has good high temperature corrosion resistance and yang resistance, excellent hot and cold processing and welding process performance, 2113 below 700 ℃ has satisfactory thermal strength and high plastic . Machining Inconel Alloy 5261 can be strengthened by cold working, and can also be connected by resistance welding, fusion welding or brazing. It has excellent corrosion resistance: It has corrosion resistance to various corrosive media. The chromium composition makes this alloy more resistant to corrosion than nickel 99.2 (alloy 200) and nickel 99.2 (alloy 201, low carbon) under yang conditions. At

  • Normative knowledge of automated part processing

    Normative knowledge of automated part processing

  • Reasons and solutions for precision parts turning and twisting

    Reasons and solutions for precision parts turning and twisting

    Reasons and solutions for turning and twisting of precision parts

  • Basic description of precision metal processing materials

    Basic description of precision metal processing materials

    1. Raw materials and thickness Precise hardware processing When selecting materials for stamping parts, avoid the use of high-brand materials to cause excessive product functions. At the same time, on the premise of satisfying product and process requirements, try to select the materials and materials used in existing mass-produced models to form data The platform provides convenience for subsequent acquisitions and inventory management. For example, the key functional requirement of ordinary cold-rolled sheet is its drawability, so as far as possible to meet the requirements of product quality, select low-profile materials. 2. Selection of sheet roll width Precision metal processing

  • aluminum 1060

    aluminum 1060

    The aluminum content of more than 99.6% is also called 1060 aluminum, which belongs to a commonly used series in the aluminum family. The density of 1060 aluminum is small (ρ = 2.7g / cm3), about 1/3 of iron, and the melting point is low ( 660 ℃), aluminum is a face-centered cubic structure, so it has high plasticity (δ: 32 ~ 40%, ψ: 70 ~ 90%), easy to process, can be made into various profiles and plates, and has good corrosion resistance; However, the strength of 1060 aluminum is very low, and the σb value in the annealed state