• MONEL400 alloy alloy plate, bar, round bar, pipe, flange, forging
• International generic name: MONEL alloy400, UNS N04400, NiCu30Fe W-Nr: 2.4360, Nicorros-alloy400, ATI400,, NAS NW400
• Executive standards: ASTM B127/ASME SB-127, ASTM B163/ASME SB-163, ASTM B165/ASME SB-165
• Main components: carbon (C) ≤ 0.30, nickel (Ni) ≥ 63.0, silicon (Si) ≤ 0.5, sulfur (S) ≤ 0.024, iron (Fe) ≤ 2.5, manganese (Al) ≤ 2.0, copper (Cu) 28.0 ~34.0
• Physical properties: density: 8.9g/cm3, melting point: 1300-1350 ℃, magnetic: no
• Mechanical properties: tensile strength: σb≥480Mpa, yield strength σb≥195Mpa: elongation: δ≥35%, hardness; HB135-179

Corrosion resistance and main use environment: The corrosion resistance of Monel400 is generally superior to nickel and copper. It is more resistant to corrosion by reducing media than pure nickel, and is more resistant to corrosion by oxidizing media than pure copper. The corrosion resistance is very good. In particular, it is resistant to corrosion by hydrochloric acid and has excellent corrosion resistance to hot concentrated alkali. Machining Monel 400 alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives.

At the same time, it is more corrosion resistant than copper-based alloys in seawater.
Monel400 is a deformable nickel-copper nickel-based alloy, which has good resistance to seawater corrosion and chemical corrosion, and has strong resistance to chloride stress corrosion cracking. This alloy is one of the few alloys that can be used in fluoride. It has good resistance to oxide stress fission corrosion in hydrofluoric acid and fluorine gas medium, such as seawater and salt water environment. In medium concentration alkaline and salt solutions, Monel 400 also has very good corrosion resistance. In colder alkaline environments, the alloy is used in weak acids such as sulfur and hydrogen fluoride.

Acid medium: Monel machining is corrosion resistant in sulfuric acid with a concentration of less than 85%. Monel400 is one of the few important materials that can withstand hydrofluoric acid.

Water corrosion: Monel400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.025mm/a.

High temperature corrosion: The highest temperature of Monel400 continuously working in the air gas is generally about 600 ℃, in high temperature steam, the corrosion rate is less than 0.026mm/a. Ammonia: Due to the high nickel content of Monel400 alloy, it is resistant to corrosion under anhydrous ammonia and ammoniated conditions below 585℃.

Supporting welding materials and welding process: The welding of MONEL400 alloy is recommended to use AWS A5.14 welding wire ERNiCu-7 or AWS A5.11 electrode EniCrCu-7, the welding material size is Φ2.4, 3.2, 4.0, the origin is: American SMC and German Nickel, welding process and instruction book are welcome to call us.

Stock situation: The stock size of MONEL400 alloy plate stock is 0.8mm-12mm, the stock size of MONEL400 alloy bar stock is Φ12mm-Φ220mm, pipe fittings and others can be customized according to customer requirements. The materials are mainly produced by Japanese metallurgy, American SMC, German ThyssenKrupp VDM. Provide original material certificate, customs declaration and certificate of origin.
Application areas: sulfuric acid and hydrofluoric acid equipment, marine heat exchangers, seawater desalination equipment, salt production equipment, marine and chemical processing equipment, propeller shafts and pumps, gasoline and water tanks, etc.

Monel 400 alloy (UNS N04400 or MCu-28-1.5-1.8 or Ni68Cu28Fe) is a kind of acidic medium such as sulfuric acid, hydrofluoric acid, hydrochloric acid, phosphoric acid, organic acid, etc. , Nickel-based alloy materials with good corrosion resistance in alkaline medium, salt and molten salt. Monel 400 alloy also has good mechanical properties, a wide range of operating temperatures from low temperature to high temperature, du has good welding performance and medium and high strength. Monel 400 is mainly used in the fields of chemistry, petrochemicals and marine development. It can be used to manufacture various heat exchange equipment, boiler feed water heaters, petroleum and chemical pipelines, containers, towers, tanks, valves, dao pumps, reaction kettles, shafts, etc. Executive standards: ASTM B 164 (bars, wires), ASTM B 564 (forgings), ASTM B 127 (plates and strips), ASTM B 165 (seamless tubes).

The machining monel alloy can be machined using the plate-making method of processing traditional iron-based materials. Water coolant is used for high-speed machining. The material shrinks during processing, and attention should be paid to the processing shrinkage margin to ensure dimensional accuracy. Monel 400 welding Monel 400 welding performance is good, you can use TIG and MIG method, the right can use Monel body or EniCu-7 welding wire, electrode; or manual arc welding and submerged arc welding; can be welded with carbon steel and low alloy steel .