In the whole process of making stainless steel plate precision castings, due to the small size of the connected belt, it will make its physical properties good. Stainless steel plate precision castings can reasonably consider their circulation and do not produce bright Starting from the crystal, the usual temperature is 715~740℃.

The round ingot of stainless steel investment casting has a relatively low tendency to crack, so that whether there is a reasonable level to ensure that its aluminum alloy has its excellent exhaust pipe feeding ability, and its order can be reasonably created during application. Close to the standard, the relative density can be increased reasonably during application, and the forging temperature is usually higher.

The manufacturing temperature of stainless steel plate precision castings must be reasonably level to ensure that the melt will have very good fluidity during the whole process of refilling. The machine and equipment must be reasonably based on the whole process of selecting the forging temperature. Some factors such as the interval of transfer and the temperature reduction during the whole transfer process are used to carry out reasonable confirmation.

The application temperature of stainless steel investment casting is reasonable to ensure that the solution will have very good fluidity during the whole process of transferring. The temperature of stainless steel plate precision castings should be selected according to the distance of transferring, the temperature reduction condition of the whole transferring process, aluminum alloy, Specifications, models, total flow and other factors to confirm.

The physical properties of stainless steel plate precision castings are higher than that of pig iron during the whole process of application. However, the characteristics of pig iron are worse for such raw materials. Stainless steel plate precision castings are soluble in the whole process of manufacturing. Relatively higher than other raw materials.

The key defect on the surface of stainless steel investment casting is pitting. If the product has such a problem, only the selection of fees can be used to solve the problem in the whole process of application, which will lead to an increase in the cost of its products, which is not good for the product. Saving of resources.