- 1. Replacement of circulating water and cleaning of water tank of Dongguan Bender. Make sure that the laser tube is filled with circulating water before the pipe bending machine works. The water quality and temperature of the circulating water directly affect the service life of the laser tube. Therefore, it is necessary to regularly replace the circulating water and clean the water tank. This is best done once a week.
- 2. Clean the lens. There will be some mirrors and focusing mirrors on the tube bender. Laser light is emitted from the laser head after being reflected and focused by these lenses. The lens is easy to get dust or other contaminants, causing laser wear or lens damage. So clean the lens every day. When cleaning, pay attention to: 1. The lens should be gently wiped, not to damage the surface coating; 2. The wiping process should be handled gently to prevent falling; 3. Be sure to keep the concave face down when installing the focusing lens.
- 3. The fan is clean. Long-term use of the fan in the pipe bending machine will cause a lot of solid dust to accumulate in the fan, causing the fan to generate a lot of noise, which is not conducive to exhaust and deodorization. When the suction of the fan is insufficient and the smoke is not smooth, the fan must be cleaned.
- 4. Clean the guide rail. Guide rail and linear axis are one of the core components of the equipment, and its function is to guide and support. In order to ensure the high processing accuracy of the pipe bending machine, the guide rails and straight lines are required to have high guiding accuracy and good motion stability. During the operation of the equipment, a large amount of corrosive dust and smoke will be generated during the processing of the processed parts. These smoke and dust will be deposited on the surface of the guide rail and linear axis for a long time, which will have a great impact on the processing accuracy of the equipment and will The formation of corrosion points on the surface of the linear axis of the guide rail shortens the service life of the equipment. Therefore, clean the bender guide rail every half a month. Turn off the tube bender before cleaning.
- 5. Inspection of optical path. The optical path system of the tube bender is completed by the reflection of the mirror and the focusing of the focusing mirror. There is no offset problem of the focusing mirror in the optical path, but the three mirrors are fixed by the mechanical part, and the possibility of offset is more Large, although there is no deviation under normal circumstances, it is recommended that the user should check whether the optical path is normal before each work.
- 6. Tightening of screws and couplings. After the motion system has been working for a period of time, the screws and couplings at the motion connection will be loose, which will affect the smoothness of the mechanical motion. Therefore, during the operation of the pipe bender, it is necessary to observe the transmission components for abnormal noise or abnormal phenomena and find problems. It should be solidified and maintained in time. At the same time, the pipe bending machine should use a tool to tighten the screws one by one after a while. The first sturdiness should be about a month after the device is used.
Daily maintenance and maintenance methods of pipe bending machine
