-
Application of PPS
Because PPS has good heat resistance, excellent mechanical properties, and good chemical stability and water resistance, PPS processed products are widely used in many fields. PPS was first applied to electrical connectors and electrical parts, because PPS has a high heat distortion temperature, good flame retardancy, and can be formed into long and thin parts.…
-
Features of Teflon Spray Machining
Teflon spraying process brings the benefits of the surface of the working parts. To a certain extent, Teflon spraying brings quality and safety assurance to the workpiece. The main reason is that Teflon spraying can make the surface of the workpiece wear-resistant and resistant. Various special properties such as heat, corrosion resistance, oxidation resistance, sealing,…
-
Application of UHMWPE
As UHMWPE has many excellent properties, it has shown great advantages in the high-performance fiber market, including from offshore oilfield mooring ropes to high-performance lightweight composite materials, and has shown great advantages in modern warfare and aviation, Aerospace, maritime defense equipment and other fields play a pivotal role.
-
Advantages of ABS plastic hand plate
3.ABScnc machining materials can be used to make prototypes. Various processing methods can be used. According to the structural characteristics, we can use silica gel casting, CNC processing, or 3D printing. Its easy processing characteristics also make the cost of prototype production lower than other materials.
-
Analysis on the correct installation and use of mute drag chains
Analysis on the correct installation and use of mute drag chains The silent drag chain has high pressure and tensile load, good toughness, high elasticity and abrasion resistance, flame retardant, stable performance at high and low temperatures, and can be used outdoors. Resistance to resistance: oil and salt resistance, and a certain degree of acid…
-
The efficiency of CNC machine tools comes from the precision of equipment processing
For CNC machine tools, its accuracy mainly includes geometric accuracy, transmission accuracy, motion accuracy and position accuracy. If the accuracy is out of range, it should be based on the response of the workpiece accuracy and use various inspection tools to determine which type of machine is present. Then check the factors that may cause…
-
CNC turning and milling composite processing manufacturers explain the selection of lathes
The CNC turning and milling composite processing manufacturer introduced the process requirements of typical parts and the batch of processed workpieces. The function that the CNC lathe should have is to make preparations and the prerequisites for the reasonable selection of CNC lathes. Meet the process requirements of typical parts
-
Precision CNC machining manufacturers explain how CNC CNC lathes are processed
According to the introduction of precision CNC machining manufacturers, the large-scale CNC machining parts are made of bar materials, and the process plan of rough machining and finishing is adopted. The specific process flow is as follows: blank → rough turning → rough milling → aging → fine turning → fine milling.
-
The Parameter Designs For Stainless Steel Turning
The stainless steels currently applied are mainly classified into martensitic stainless steels, ferritic stainless steels, and austenite stainless steels according to their structural conditions. Alloy steels containing greater than 11.7% chromium or greater than 8% nickel are often referred to as stainless steels. The addition of additional metallic elements (Cr and Ni) to the alloy…
-
Selection Of Tools Suitable For CNC Machining
It is important to choose the right CNC tool when programming. The general requirements for CNC tools are easy installation and adjustment, excellent rigidity, high accuracy, and excellent durability. Based on this, a comprehensive consideration of the cutting performance of the workpiece material, the processing power of the machine tool, and the types of CNC…
-
Cnc Milling Steel Parts Using Double-Edged End Mill
With the constant development of science and technology, several new materials with high strength, high toughness, and high wear resistance are emerging to meet the special requirements of the performance of machine parts. However, cutting of these new materials also poses new problems for the study of metal cutting tools. The great features in machining…
-
Understand component accuracy and tolerances to improve product design
Computer-aided design (CAD) software has become the default tool for drawing fully rendered objects on a computer screen and transferring them to the manufacturer for real parts. However, it is dangerous to think that anything that can be designed is easy to create. Software programs can draw more accurate and accurate dimensions than real machines…
