Category: Machining Methods

In the liquid state, aluminum alloy reacts with moisture in the air to form Al2O3 and H2. This Al2O3 has a loose structure and a specific gravity similar to that of aluminum. It is easily suspended in aluminum liquid and has a strong adsorption effect with H2, which can be formed Adsorption core. Recycled aluminum…

The CNC machining center has always been very concerned in today’s machining systems in all walks of life. Its existence can achieve various complex and precise machining requirements and operations. Therefore, the reliable CNC machining center equipment in the whole market has always had a high sales volume. Naturally, in the related technical application field,…

With the development of science and technology, the computer digital control technology is becoming more and more mature, my country’s appropriate CNC transformation of metal cutting machine tools is a wise choice to improve production efficiency. CNC drilling machines are also relatively new machinery and equipment. It is also one of the important equipment for…

Nowadays, the enterprise’s production and processing are particular about it. As one of the most commonly used equipment for processing enterprises, traditional CNC processing equipment has been unable to meet the needs of enterprises. Instead, it is a brand new CNC machining center. This kind of equipment uses the combined tool to automatically switch to…

CNC drilling machines are mainly used in major machinery factories to continue cutting and grinding various diversified plates. The working object of CNC drilling machine is made of steel or iron products with high hardness, which requires strict quality of the electric rotor head, speed and frequency. Nowadays, CNC drilling machine equipment has been well…

The modernized CNC drilling machine refers to a tool built on the basis of digital control to realize the development of drilling machine work. Especially built on the premise of increasing demand for modern production technology, the well-known CNC drilling machine is implemented through continuous improvement of production, especially through the continuous improvement and implementation…

Because the thermal conductivity of titanium is small, the heat generated during cutting cannot be dissipated and will be stored in the tool, so the wear on the tool will increase.Because of the high chemical activity, when the cutting speed increases, more cutting heat will occur and the temperature of the cutting part will increase,…

Method 1: Degreasing treatment. Wipe with absorbent cotton soaked in solvent. After removing oil, wipe with a clean cotton cloth several times. Commonly used solvents are: trichloroethylene, ethyl acetate, acetone, methyl ethyl ketone and gasoline. Method 2: Chemical treatment in the following solution after degreasing: concentrated sulfuric acid 27.3 (mass fraction, the same below), potassium…

One is: the content of impurities in the molten iron, especially the content of iron oxide, it is very easy to produce slag or slag pores on the surface of the machine tool castings; The second is: the gas content in molten iron, high gas content is easy to make large castings have pores on…

The primer must be evenly brushed, sprayed, or dipped. The primer must be fully stirred before use, and diluted to an appropriate viscosity before it is applied. And it can be used in the processing of parts such as instrumentation, electronics, light industry, standard parts, bearing industry, auto parts industry, etc. What directly affects the…